Review gates you can tick through.
Interactive checklists derived from the cited standards and guidance. Progress is saved in your browser; every list prints cleanly.
- 33 items · 4 sections
Temperature mapping study checklist
Everything to settle before loggers go in, watch during the study, check in the analysis and include in the report.
Open checklist - 20 items · 4 sections
Calibration certificate review checklist
A receipt review that catches missing uncertainty, missing decision rules, wrong points and lost as-found data before the certificate is filed.
Open checklist - 16 items · 3 sections
Mapping data-quality checklist
The checks to run on a logger export before any minimum, maximum or mean is trusted.
Open checklist - 16 items · 4 sections
Temperature excursion response checklist
Contain, characterise, assess, decide, learn — the steps and records an excursion deviation needs.
Open checklist - 14 items · 3 sections
Choosing a calibration laboratory checklist
What to verify on the scope, what to agree in the order, and what to check when the certificate comes back.
Open checklist - 18 items · 3 sections
Monitoring system qualification checklist
IQ/OQ/PQ points for a continuous temperature monitoring system, including the failure modes that are usually missed.
Open checklist
ISO/IEC 17025 checklists
From the documentation pack. These are built to be filled in and filed as records, so they are documents rather than something you tick through in the browser. The gap analysis is free to download in full.
- CHK-01free
ISO/IEC 17025:2017 Gap Analysis and Self-Assessment
Clause-by-clause self-assessment with evidence, gap and action columns.
- CHK-02
UKAS Initial Assessment Preparation Checklist
Everything to have ready before the pre-assessment and initial assessment visits.
- CHK-03
Calibration Certificate Review Checklist
Review gate for every certificate before authorisation and issue.
- CHK-04
Temperature Mapping Study Checklist
Protocol, sensors, placement, duration, loading, analysis and report content.
- CHK-05
Mapping Data Quality Checklist
Units, timestamps, gaps, duplicates, flatlines, jumps, identifiers and metadata.
- CHK-06
Supplier Calibration Certificate Acceptance Checklist
Acceptance review for incoming calibration certificates from external providers.